XP3 Builders Kit
Only the parts that ADN makes. All other parts will need to be obtained elsewhere. This option is designed for those who want a super sleek gun. No extra frills. Just the ultra basics.

Kit Contains:

Body, Bolt, Sled, Pump Arms, and Hardware.

You will need to provide:

11/16" Autococker style valve, Autococker style ball detent, Azodin KP3 and Tipx Style Magazines.
XP3 Conversion Kit 
The XP3 Conversion Kit comes with everything you need to convert an existing KP3 to the XP3, while also having a pre-installed 11/16" Palmer LT Valve, a cocker style ball detent, the top rails, and the removable magwell extension.

Kit Contains:

Body, Bolt, Pump Arms, Sled, 
​Palmer LT Valve, Maddman Green Valve Spring, Ball Detent,
​ Top Rails, Magwell Extension, and Hardware.

​​

You will need to provide:

Azodin KP3, and Tipx Style Magazines
XP3
Designed to be a smaller and lower cost version of the successful X1P, the XP3 combines the accuracy and consistency of sniper pumps while using a lower cost base platform. By dropping the size of the sled and keeping the KP3's 'half block' body style, the weight and length has been shortened from the X1P to a very tight feeling marker. 

Using the Tipx style magazines and having a removable magwell extension, you have the option of using 4+ different magazines, one being a drum mag. Designed from the beginning to shoot First Strike Rounds, the XP3 will feed and shoot FSR with no problem. Also, with the magazine follower pushing into the breech, it will cause a jam when you are out of ammo, letting you know to reload. 


The fully built XP3 starts off as a brand new KP3, which I then convert over for you. As such, you will also receive everything else that normally comes with a KP3 that isn't used on the XP3. This will let you convert it back to a hopperfed KP3 with just the swapping of a few parts and can easily be done in the staging area.
​​​
The XP3 will arrive in an aluminum case with a custom foam insert designed to organize and hold your gun, mags, barrels, and a 45/50ci tank. The case was designed to carry everything but your mask for a day of play, and looks pretty cool too.



Gun Comes with:

ADN                                                             XP3 (with rails and mag extension)
Azodin Paintball                                           KP3​
Palmers Pursuit's            Low Turbulence Valve (installed)
Maddmann Paintball's         Green Autococker Valve Spring (installed)
Autocockerparts.com          Autococker Detent (installed)
​​
ADN                          Custom Gun Case​
Tippmann's                   Tipx 12 Round Magazine x 2
Somewhere in China           Full Standard and Metric Allen Wrench Sets​


​​You will need to provide:

Paint/First Strike Rounds, Air Tank (45/50ci is best),
​ and friend/ex-girlfriends to shoot at.

Each option differs in what parts you will need to source yourself. If you already have a KP3 and/or lots of paintball parts, no point in paying for more stuff you don't need.

4 Purchase Options Available
XP3 Expanded Conversion Kit 
The XP3 Expanded Conversion Kit comes with everything the normal converstion kit does, but with 2 Tipx 12 round mags, and the custom case.

Kit Contains:

Body, Bolt, Pump Arms, Sled, 
​Palmer LT Valve, Maddman Green Valve Spring, Ball Detent,
​ Top Rails, Magwell Extension, and Hardware.

​​

You will need to provide:

Azodin KP3
Sold out.
Sold out.
Sold out.
Sold out.